Specification:

• 5× 10/100/1000 Mbps RJ45 ports

• With four PoE+ ports, transfers data and power on one single cable

• Works with IEEE 802.3af/at compliant PDs

• 802.1p/DSCP QoS enable smooth latency-sensitive traffic

• Supports PoE Power up to 30 W for each PoE port

• Supports PoE Power up to 65 W for all PoE ports*

• Up to 250m data and power transmitting range under Extend Mode**

• PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices

• Plug and Play, no configuration and installation required

HARDWARE FEATURES

Interface• 5× 10/100/1000Mbps RJ45 Ports
• AUTO Negotiation
• AUTO MDI/MDIX
Network Media• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
• EIA/TIA-568 100Ω STP (maximum 100m)
• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)
• EIA/TIA-568 100Ω STP (maximum 100m)
• 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
• EIA/TIA-568 100Ω STP (maximum 100m)
Fan QuantityFanlessExternal Power SupplyExternal Power Adapter (Output: 53.5 VDC / 1.31 A)Packet Forwarding Rate7.44 MppsPoE Ports (RJ45)• Standard: 802.3 af/at compliant
• PoE Ports: Ports 1–4
• Power Supply: 65 W
Mac Address Table2KJumbo Frame16 KBSwitching Capacity10 GbpsDimensions ( W x D x H )3.9×3.9×1.0 in (99.8×98×25 mm)Max Power Consumption• 3.44 W (220/50 Hz. no PD connected)
• 74.49 W (220/50 Hz. with 65 W PD connected)Max Heat Dissipation• 11.73 BTU/h (no PD connected)
• 254.01 BTU/h (with 65 W PD connected)SOFTWARE FEATURESAdvanced Features• Compatible With IEEE 802.3af/at Compliant PDs
• Mac Address Auto-Learning And Auto-Aging
• IEEE 802.3x Flow Control
• 802.1p/DSCP QoS
• IGMP Snooping
• Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission)
• PoE Auto Recovery (Ports 1-4)
Transfer MethodStore-And-ForwardOTHERSCertificationFCC, CE, RoHSPackage Contents• TL-SG1005P
• Power Adapter
• Installation GuideEnvironment• Operating Temperature: 0–40 ℃ (32–104 ℉);
• Storage Temperature: -40–70 ℃ (-40–158 ℉)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing

•