Specification:

• Built-in 13dBi 2x2 dual-polarized directional MIMO antenna

• Adjustable transmission power from 0 to 26dBm/200mw

• System-level optimizations for more than 15km long range wireless transmission

• TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications

• Centralized Management System – Pharos Control

• AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes

• Passive PoE Adapter supports up to 60 meter (200 feet) Pow

• 
  

• HARDWARE FEATURES

• ProcessorQualcomm Atheros Enterprise 560MHz CPU, MIPS 74KcMemory64MB DDR2 RAM, 8MB FlashInterface1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
  1 Grounding Terminal
  1 Reset ButtonPower SupplyPassive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
  Voltage range: 16-27VDCPower Consumption9.8 Watts Max
  Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.Dimensions ( W x D x H )224 x 79 x 60 mmAntenna TypeBuilt-in 13dBi 2x2 Dual-polarized Directional Antenna
  Beam Width: 45° (H-Plane) / 30° (E-Plane)
  Note: For more details, please refer to datasheetProtection15KV ESD Protection
  6KV Lightning ProtectionEnclosureOutdoor ASA stabilized plastic material
  IPX5 waterproof CertificationWIRELESS FEATURESWireless StandardsIEEE 802.11a/n (with Pharos MAXtream disabled)Proprietary ProtocolTDMA Mode (with Pharos MAXtream enabled)Wireless SpeedsUp to 300Mbps (40MHz,Dynamic)
  Up to 144.4Mbps (20MHz,Dynamic)
  Up to 72.2Mbps (10MHz,Dynamic)
  Up to 36.1Mbps (5MHz,Dynamic)Frequency5.15~5.85GHz
  Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.Transmission Power23dBm/200mw (Adjustable power by 1dBm)
  Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.SOFTWARE FEATURESWireless ConfigurationsPharos MAXtream TDMA Technology
  802.11a/n Modes
  Selectable Channel Width: 5/10/20/40MHz
  Automatic Channel Selection
  Transmission Power Control
  Dynamic Frequency Selection (DFS)
  WDS Enable/Disable
  Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
  SSID Broadcast Enable/Disable
  Multi-SSID with VLAN Tagging (AP mode only)
  Distance/ACK Timeout Setting
  Wireless MAC Address Filter
  Wireless Advanced:
  > Beacon Interval/RTS Threshold/Fragmentation
  >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi MultimediaManagementDiscovery and Remote Management via Pharos Control application
  HTTP/HTTPS Web-based management
  System Log
  SNMP Agent(v2c)
  Ping Watch Dog
  Dynamic DDNS
  SSH ServerSystem ToolsWireless Signal Quality Indicators:
  Signal Strength/Noise/Transmit CCQ/CPU/Memory
  Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
  Spectrum Analyzer
  Speed Test
  Ping
  TracerouteSystem-level OptimizationsOptimized IGMP Snooping/Proxy for multicast applications
  Hardware watch dogPOE ADAPTER FEATURESDimensions(W x D x H)85.8×43.9×29.7 mmInterfaces1 AC Jack with Earth Ground
  1 10/100Mbps Shielded Ethernet Port (Power + Data)
  1 10/100Mbps Shielded Ethernet Port (Data)ButtonRemote Reset ButtonPower Status LEDsGreen
  Input100-240VAC, 50/60HzOutput24VDC, 0.5A Max
  +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)Efficiency>80%CertificationsCE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-markOTHERSCertificationCE, FCC, RoHS, IPX5Package ContentsOutdoor Wireless CPE
  24V 0.5A Passive PoE Adapter
  Pole Mounting Straps
  AC Power Cord
  Installation GuideSystem RequirementsMicrosoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
  Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.EnvironmentOperating Temperature: -40℃~70℃ (-40℉~158℉)
  Storage Temperature: -40℃~70℃ (-40℉~158℉)
  Operating Humidity: 10%~90% non-condensing
  Storage Humidity: 5%~95% non-condensinger over Ethernet deployment and allows the device to be reset remotely