Specification:

• Built-in 9dBi 2x2 dual-polarized directional MIMO antenna

• Adjustable transmission power from 0 to 25dBm/500mw

• System-level optimizations for more than 5km long range wireless transmission

• TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications

• Centralized Management System – Pharos Control

• AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes

• Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

HARDWARE FEATURES

ProcessorQualcomm Atheros 560MHz CPU, MIPS 74KcMemory64MB DDR2 RAM, 8MB FlashInterface1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
1 Grounding Terminal
1 Reset ButtonPower SupplyPassive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
Voltage range: 16-27VDCPower Consumption5 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.Dimensions ( W x D x H )224 x 79 x 60 mmAntenna TypeBuilt-in 9dBi 2x2 Dual-polarized Directional Antenna
Beam Width: 65° (H-Plane) / 35° (E-Plane)
Note: For more details, please refer to datasheetProtection15KV ESD Protection
6KV Lightning ProtectionEnclosureOutdoor ASA stabilized plastic material
IPX5 waterproof CertificationWIRELESS FEATURESWireless StandardsIEEE 802.11b/g/n (with Pharos MAXtream disabled)Proprietary ProtocolTDMA Mode (with Pharos MAXtream enabled)Wireless SpeedsUp to 300Mbps (40MHz,Dynamic)
Up to 144.4Mbps (20MHz,Dynamic)
Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic)Frequency2.4~2.483GHz
Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.Transmission Power27dBm/500mw (Adjustable power by 1dBm)
Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.SOFTWARE FEATURESWireless ConfigurationsPharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi MultimediaManagementDiscovery and Remote Management via Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH ServerSystem ToolsWireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
Ping
TracerouteSystem-level OptimizationsOptimized IGMP Snooping/Proxy for multicast applications
Hardware watch dogPOE ADAPTER FEATURESDimensions(W x D x H)85.8×43.9×29.7 mmInterfaces1 AC Jack with Earth Ground
1 10/100Mbps Shielded Ethernet Port (Power + Data)
1 10/100Mbps Shielded Ethernet Port (Data)ButtonRemote Reset ButtonPower Status LEDsGreenInput100-240VAC, 50/60HzOutput• V2.0: 24VDC, 0.6A Max
• V3.0: 24VDC, 0.5A Max
• V3.20: 24VDC, 0.25A Max

+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)Efficiency>80%CertificationsCE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-markOTHERSCertificationCE, FCC, RoHS, IPX5Package ContentsOutdoor Wireless CPE
24V 0.6A Passive PoE Adapter
Pole Mounting Straps
AC Power Cord
Installation GuideSystem RequirementsMicrosoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.EnvironmentOperating Temperature: -40℃~70℃ (-40℉~158℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing