Specification:

• Complies with UL -864 and NFPA-72.
  20 x 4 Dot Matrix LCD Display.
  Operates on 120 – 220v 60 /50 Hz, AC Mains power supply.
  Standby (battery) backup 24v DC power supply with builtin charger.
  Touch Keypad for user friendly operation.
  Epoxy powder coated finish.
  Class- B, Style B / C initiating device circuit (IDC).
  All zones accept smoke detectors and any normally open contact device.
  Class B Notification Appliance Circuits (NAC).
  NAC shall be programmed as auto silence / Silence Inhibit.
  Error free Fire / Fault status in unambiguous colored LED indication.
  1000 Event storage with RTC.
  Main, Standby status with audible and visual indication.
  Two Form C relays for fire and fault.
  Resettable / Steady 24V D.C. Output.
  RS 485 Communication facility.
  TCP/IP facility (Optional)
  MODBUS for BMS integration (Optional).
  PC software (optional)
  External Zone Wise Sounder/Contact via RS 485 (Optional).
  All field wiring circuits are supervised.
  Zone Isolation facility with loop voltage cut off.
  Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128.
  Facility to connect Public Address System (PA) through RS-485 Communication.
  Peer to Peer network facility.
  Maximum 16 panels can be connect in a Single Network.
  

• ModelDescriptionRE-900RP SeriesFire Alarm Repeater PanelElectrical Specification
  Primary Power
  120 – 220VAC ± 10%, 60 / 50 Hz.

• Initiating Device Circuits
  All zones are
  Class B Style B/C operation (Programmable).
  Normal Operating Voltage   :   14 – 21 VDC.
  Alarm Current   :   15 – 30mA.
  Short Circuit Current   :   45mA Maximum.
  Loop resistance   :   100 ohms Maximum.
  End-Of-Line Resistor   :   4K7, 1/2watt
  Standby Current   :   7mA (2.5mA for Detectors)

• Standby Power
  24V D.C
  Quiescent current   :   120 mA 

• Operating Condition
  Operating Temperature   :   0 – 49° C/32-120° F.
  Relative Humidity   :   93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F. Charging Circuit
  Charging Voltage   :   28.0V, ±0.5V
  Charging Current   :   1.2A(Max);

• D.C. Output(Resettable / Steady)
  24VDC Output ,1A Max.

• Common Relays
  Type   :   Form C
  No of Relays   :   2
  Relay Contact Rating   :   2Amps @ 30 VDC, 0.5Amps @ 125VAC.
  Power Factor   :   1.0

• Notification Appliance Circuits
  Class B Style – Y wiring
  Operating Nominal Voltage   :    24VDC
  Special Application Current   :   from 12 Zone Upto 64Zone
  NACs   :   2 Amps (1 A per circuit) Current above 64Zone
  NACs   :   4 Amps (1 A per circuit)
  Line Drop   :   1.8V
  End-Of-Line Resistor   :   4K7, 1/2wattDimensions
  ZonesWidthHeightDepth12 Zone42535012016 Zone42535012020 Zone50060016024 Zone50060016032 Zone50060016048 Zone60070016064 Zone600100016096 Zone6001400160128 Zone6001400160Ordering Information
  ModelsDescriptionRE-901212 Zone Fire Alarm Control PanelRE-901616 Zone Fire Alarm Control PanelRE-902020 Zone Fire Alarm Control PanelRE-902424 Zone Fire Alarm Control PanelRE-903232 Zone Fire Alarm Control PanelRE-904848 Zone Fire Alarm Control PanelRE-906464 Zone Fire Alarm Control PanelRE-909696 Zone Fire Alarm Control PanelRE-9128128 Zone Fire Alarm Control PanelCompatible Devices