SPECIFICATIONS:

Communication

Jeweller communication technology

Proprietary wireless communication technology to transmit commands, alarms, and events.

Key features:

• Two-way communication.

• Advanced anti-sabotage.

• Block encryption featuring a dynamic key.

• Instant notifications.

• Remote control and configuration in Ajax apps.

Frequency bands

866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
905.0–926.5 MHz
915.85–926.5 MHz
921.0–922.0 MHz

Depends on the sales region.

Maximum effective radiated power (ERP)

up to 20 mW

Automatic power control to reduce power consumption and radio interference.

Radio signal modulation

GFSK

Radio communication range

up to 1,200 m

Between the device and a hub (or a range extender) in an open space.

Calculate radio communication range at the facility

Encrypted communication

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Frequency hopping

To prevent radio interference and jamming.

Detection

Sensitive element

PIR sensor

Motion detection distance

up to 12 m

When installed at the height of 2.4 m.

Motion detection angle

horizontal: 88.5°

Motion detection speed

from 0.3 to 2 m/s

The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.

Sensitivity

3 levels

Adjusted by a PRO or a user with admin rights in the Ajax app.

Pet immunity

weight: up to 20 kg

height: up to 50 cm

False alarm prevention

SmartDetect

Software algorithm.

Temperature compensation

Effective motion detection at temperatures from −10 °C to +40 °C.

Recommendations

It is recommended to install the detector at a height of 2.4 m.

The device is designed for indoor use only.

Glass break detection

Sensitive element

electret microphone

Glass break detection distance

from 0.3 to 9 m

Glass break detection angles

horizontal: 180°

Sensitivity

3 levels

Adjusted by a PRO or a user with admin rights in the Ajax app.

False alarm prevention

DualTone

Two-factor software algorithm for glass break verification by low and high sound frequencies.

Glass break characteristics

Minimum glass size

279 × 279 mm

Detection distance is up to 9 m or all glass types when the High sensitivity level is selected.

Glass types and their thickness:

• standard pane — 3 mm and 10 mm

• tempered glass — 3 mm and 10 mm

• laminated glass — 3 mm and 13 mm

• wired glass — 6 mm

• insulated glass — 3 mm and 6 mm

• annealed glass — 1.6 mm

Caution

The device will not detect glass breaking if the glass is covered with shockproof, sunscreen, decorative, or any other film.

Sabotage protection

Tamper alarm

Notifications on attempts to detach the device from the surface or remove it from the mounting panel.

Protection against spoofing

device authentication

Communication loss detection

after 36 s

Detection time depends on the Jeweller or Jeweller/Fibra settings.

Power supply

Battery

1 × CR123A

Pre-installed.

Type

type C

Calculated battery life

up to 5 years

Detector’s operating voltage range

2.1−3.3 V⎓

Detector’s nominal operating voltage

3 V⎓

Quiescent detector’s current consumption at nominal voltage

38 μA

Maximum detector’s current consumption at nominal voltage

60 mA

Full battery capacity

1,600 mAh

Low battery voltage

2.5 V⎓

Low battery recovery voltage

2.7 V⎓

End-of-life battery voltage

2.1 V⎓

Device is switched off.

End-of-life battery capacity

300 mAh

Manufacturer

Huiderui or Duracell

Enclosure

Dimensions

110 × 65 × 50 mm

Weight

92 g

Operating temperature range

from −10 °C to +40 °C

Operating humidity

up to 75%

Protection class

IP50

Colors

Black

White

Complet set

CombiProtect Jeweller

SmartBracket mounting panel

CR123A battery (pre-installed)